Отображение 133–144 из 1124Сортировка: самые недавние
-
$40.00
Parameter Specification Part Number 1000442627 Compatible Models SANY SY26U), SY35U), SY50U), SY395H), SY365CD) Material High-strength steel casing with synthetic fiber media Application Hydraulic system filtration for excavators) Dimensions Standard OEM specifications (?150mm x 200mm) Hydraulic Pressure ??350 бар (SLSS hydraulic system compatible)) Temperature Range -25??C to +110??C (arctic to tropical conditions)) Standards ISO 4548-3, SAE…
-
$75.00
Parameter Details Part Number SY75-XXXX-XXX (OEM-compatible) Compatibility SANY SY75/SY75C/SY75W Series Excavators) Material Industrial-grade ABS + Tempered Glass Display Resolution 800??480 Pixels (High Brightness LED Backlit) Power Input 24V DC ??10% (ISO 16750-2 Certified)) Sealing Standard IP65 Dust/Water Resistance) Operating Temperature -30??C to +70??C) Certification CE, RoHS, ISO 14982 (EMC))
-
$1,000.00
Parameter Specification Material High-Strength Steel Alloy (U-section design)) Operating Voltage 24V DC ??10% (CAN-Bus compatible)) Output Signal Digital CAN-Bus & Analog 4-20mA) Protection Class IP67 (Dust/Water resistant)) Temperature Range -30??C to +80??C) Mounting Type Direct bolt-on integration) Compatibility SANY SCC Series Crawler Cranes) Certification CE, ISO 13732-1)
-
$20.00
Attribute Specification Part Number SY365C-HOSE-TURBO-01 Material High-temperature Fluorosilicone Rubber Pressure Rating 35-40 MPa (5080-5800 PSI) Temperature Range -40??C to +150??C (-40??F to +302??F) Compatibility Sany SY365C/SY365CD Hydraulic Excavators Inner Diameter 25 mm (1.0″) Reinforcement 4-Layer Steel Wire Braiding Certifications SAE J20 R12, ISO 1436-1 OEM Compliance Matches Sany SY365C Hydraulic System Standards Connection Type 37??…
-
$18,000.00
Parameter Specification Model Name SY215C) | SY235C) | SY135C) Engine SY215C: ISUZU/Cummins) | SY235C: Isuzu GH-6HK1) | SY135C: ISUZU 4JJ1-XDJAG) Power SY215C: 118-128.4 kW) | SY235C: 212 kW) | SY135C: 12 r/min rotation) Operating Weight SY215C: 21,900-21,700 kg) | SY235C: 32,800 kg) | SY135C: 13,500 kg) Bucket Capacity SY215C: 1.1-1.2 m3) | SY235C: 1.4 m3)…
-
$2,600.00
Parameter Specification Input Voltage 24V DC ??10% (Compatible with industrial power systems)) Operating Temperature -40??C to +85??C (MIL-STD-810G certified)) Communication Protocol RS485 Modbus RTU (IEEE 802.3 compatible)) Protection Rating IP65 (NEMA 4X equivalent)) Control Accuracy ??0.25% FS (Matching Woodward PSG standards)) Mechanical Interface ISO 5211 F05 flange (Interchangeable with OEM)) Certifications CE, RoHS, ATEX II…
-
$200.00
Parameter Specification Model Number K3V112DT (K3V Series)) Part Number 60100389-J) Type Hydraulic Main Pump (Axial Piston Pump)) Maximum Pressure 35 MPa (350 бар)) Displacement 112 cc/rev (Typical for SY135)) Flow Rate 224 L/min @ 2000 RPM) Material Cast Iron Housing, Aluminum Alloy Rotor) Compatibility Sany SY135 Crawler Excavator) Certification ISO 9001, CE) Warranty 1 Year…
-
$7.00
Parameter Value Brand JCB Filter Type Fuel/Water Separator Material Glass Fiber Filtration Efficiency 14 Micron Nominal Rating Max Flow Rate 12 GPM (45.4 L/min) Burst Pressure 320 PSI Dimensions (H??OD) 183mm ?? 94mm Compatible Models JCB3CX, JCB Q33101-020, 1125030-T68L0 OEM Reference JCB 32007483 Installation Spin-On Type
-
$715.00
Parameter Specification Input Voltage 24V DC (Range: 18-32V) I/O Points 34-pin x2 + 26-pin x2 (Total 120 I/O channels) Communication Protocol CAN 2.0B, RS-485 Operating Temperature -25??C to +70??C Protection Class IP65 (Dust/Water resistant) Compatible Models SANY SY5250~SY5650 series pump trucks Control Functions Pumping/boom/stabilizer/outrigger logic control Certification CE, ISO 13732-1 (Ergonomic certification) Firmware Update Via…
-
$5,000.00
Specification Detail Applicable Models Komatsu PC180-6, PC180-7, PC200-6, PC200-7 Excavators Material High-grade Alloy Steel (SAE 8620) Gear Ratio 4.189:1 (Final Reduction Stage) Torque Capacity 12,500 N??m (Maximum Input Torque) Oil Capacity 16.5L (SAE 80W-90 GL-5 Gear Oil) Weight 148 kg ??0.5% Operating Temperature -25??C to 120??C Compatibility SANY SY135C, SY200C Excavators (Adapter Kit Required) OEM…
-
$100.00
Parameter Specification Hydraulic Pump Model A11VLO190LRDS
-
$135.00
Parameter Specification Compatibility SANY SY75C/SY75W Series Excavators) Components Included Fuse Box, Relay Assembly, Wiring Harness Interface Voltage Rating 24V DC (Standard Construction Machinery Grade) IP Protection IP65 Water/Dust Resistance Certification CE, ISO 3457:2025 (Road Vehicle Electrical Standards) Connector Type AMP SuperSeal 4.0 Series Warranty 12 Months Limited Component Warranty MOQ 1 Unit (Pre-configured Assembly)
